Kitaplar

2019

• Çalışkan C.İ., Double Stud Air Cargo Fitting, Lambert Academic Publishing, ISBN: 978-620-0-48627-1

Makaleler/Bildiriler

2024

• Çalışkan C. İ., Özer G., Khan H. M., A Novel Form “Bubble Microstructure” in LPBF and Investigation of Its Mechanical Strength on TPMS-Gyroid, DOI: 10.1007/s12540-024-01798-3
• Tütük İ., Acar S., Özer G., Güler K. A., Microstructure evolution of AlSi10Mg alloy in RAP process, DOI: 10.1515/mt-2024-0078
• Bayrak Y., Kısasöz B. Ö., Tarakçı G., Kısasöz A., Characterization of Al/B₄C–Y₂O₃ hybrid composites produced by vacuum hot pressing combined with Al₂O₃–Y₂O₃ interaction, DOI: 10.1016/j.ceramint.2024.07.007
• Tütük İ., Ural M. M., Özer G., Kısasöz A., Influence of Solution Treatment Process on the Properties of Duplex Stainless Steels: A Comparative Study on Microstructure and Corrosion Properties of UNS S32205 and UNS S32760, DOI: 10.1007/s11663-024-03154-7
• Kısasöz B. Ö., Tütük İ., Acar S., Kısasöz A., Electrochemical corrosion behaviour of UNS S32205 duplex stainless steel dependent on sigma phase precipitation, DOI: 10.1515/mt-2023-0325
• Coşkun M., Sağbaş B., Akyıldız Y., Odabaş Ö. C., Investigation of the Effect of Process Parameters and Geometry-Related Variations on Residual Stress for Aluminum 7050 Alloy Produced via Laser Powder Bed Fusion, DOI: 10.1007/s11665-024-09374-x
• Işık R. G., Kısasöz B. Ö., Tarakçı G., Karabeyoğlu S. S., Uğuz T., Kısasöz A., Influence of High-Velocity Oxy-fuel Sprayed Cr3C2-NiCr Coating on Corrosion and Wear Properties of AISI 2205, DOI: 10.1007/s11665-024-09324-7
• Tütük İ., Ural M. M., Yılmaz M. S., Özer G., Development of an Alternative Heat Treatment to the Traditional T6 Heat Treatment of AlSi10Mg Alloy Produced by Additive Manufacturing, DOI: 10.1007/s11665-024-09314-9 
• Özkan T., Tütük İ., Acar S., Gecu R., Güler K. A., Microstructural, hardness, and wear properties of Mg₂Si-reinforced Al matrix in-situ composites produced by low superheat casting, DOI: 10.1016/j.mtcomm.2023.107937

2023

• Yarar E., Ertürk A. T., Özer G., Bulduk M. E., Post-process drilling of AlSi10Mg parts by laser powder bed fusion, DOI: 10.1007/s00170-023-11170-1
• Öztürk K., Kısasöz A., Özer G., Karaaslan A., Precipitation of carbides in a nickel-based cast heat-resistant alloy during thermal exposure: evolution of microstructure, hardness and corrosion properties, DOI: 10.1515/mt-2022-0243
• Kısasöz B. Ö., Koç E., Kısasöz A., Karabeyoğlu S. S., Dry sliding wear behavior of energy density dependent PA 12/Cu composites produced by selective laser sintering, DOI: 10.1515/mt-2022-0260
• Ertürk A. T., Yarar E., Özer G., Bulduk M. E., The comparison of pullout strengths of various producing methods for internal screw threads of additive manufactured metal parts, DOI: 10.1007/s43452-023-00804-6

• Çalışkan C.İ, Khan H. M., Ural M. M., Hybrid Material Usage in TPMS Forms Fabricated by Additive Manufacturing, Comparison of Mechanical Strength of Lattices Produced with AlSi10Mg and 7050 Materials, DOI: 10.1016/j.mtcomm.2023.106872
• Çalışkan C. İ., A novel synchronous scanning strategy in laser powder bed fusion and effect on mechanical properties of industrial gears, DOI: 10.1007/s00170-023-12109-2
• Çalışkan C.İ., Özer G., Bulduk M.E., Sarıtaş U.S., Recycling of Laser Powder Bed Fusion Scraps in Conventional Plastic Injection Systems, DOI: 10.1007/s10924-023-02997-6
• Çalışkan C. İ., Koca A., Özer G., Akbal Ö., Bakır S., Efciency comparison of conformal cooling channels produced by additive and subtractive manufacturing in automotive industry plastic injection moulds: a hybrid application, DOI: 10.1007/s00170-023-11389-y
• Birsen D., Tütük İ., Acar S., Karabeyoğlu S. S., Özer G., Güler K. A., Microstructure and wear characteristics of hybrid reinforced (ex-situ SiC–in-situ Mg2Si) Al matrix composites produced by vacuum infiltration method, DOI: 10.1016/j.matchemphys.2023.127743
• Tütük İ., Acar S., Güler K. A., The Application of the Direct Water Cooling Process on the Lost-Foam Casting Technique to Improve Microstructural and Mechanical Properties of A356 Alloy, DOI: 10.1007/s40962-022-00950-2

2022

• Cengiz S., Azaklı Y., Ceylan D., Tarakçı G., Tarakçı M., Gencer Y., Thuvander M., Effects of Nb on borosiliciding of CoCrFeNiNbx high-entropy alloy, DOI: 10.1016/j.vacuum.2022.111677

• Koç E., Zeybek S., Kısasöz B. Ö., Çalışkan C. İ., Bulduk M. E., Estimation of surface roughness in selective laser sintering using computational models, DOI: 10.1007/s00170-022-10406-w

• Khan H. M., Çalışkan C. İ., Bulduk M. E., The Novel Hybrid Lattice Structure Approach Fabricated by Laser Powder Bed Fusion and Mechanical Properties Comparison, DOI: 10.1089/3dp.2022.0224

• Koca A., Çalışkan C. İ., Koç E., Akbal Ö., A Novel 3-D Printed Air-Cooled Fuel Cooler Heat Exchanger for Aviation Industry, DOI: 10.1080/01457632.2022.2134077

• Çalışkan C. İ., Khan H. M., Özer G., Waqar S., Tütük İ., The effect of conformal cooling channels on welding process in parts produced by additive manufacturing, laser powder bed fusion, DOI: 10.1016/j.jmapro.2022.09.036

• Majeed M., Khan H. M., Wheatley G., Situ R., Influence of post-processing on additively manufactured lattice structures, DOI: 10.1007/s40430-022-03703-8

• Coşkun M., Dizdar K. C., Tarakçı G., Özer G., Dispinar D., Recycling of additive manufactured AlSi10Mg and its effect on mechanical properties, DOI: /10.1016/j.matchemphys.2022.126411 

• Özer G., Investigation of the Effects of Aging Heat Treatment on AA7020 Microstructure-Mechanical and Physical Properties, Bosphorus International Heat Treatment Symposium 2022

• Çalışkan C. İ., Arpacıoğlu Ü., Additive manufacturing on the façade: functional use of direct metal laser sintering hatch distance process parameters in building envelope, DOI: https://doi.org/10.1108/RPJ-11-2021-0300

• Çalışkan C. İ., Arpacıoğlu Ü. T., Energy Efficient Solution Proposal with Additive Manufacturing in the Façade, BCCS2022 (Bio) Climate Symposium 2022

• Özer G., Khan H. M., Tarakçı G., Yılmaz M. S., Yaman P., Karabeyoğlu S. S., Kısasöz A., Effect of heat treatments on the microstructure and wear behaviour of a selective laser melted maraging steel, DOI: 10.1177/09544089221093994

• Tarakçı G., Khan H. M., Yılmaz M. S., Özer G., Effect of building orientations and heat treatments on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties, fracture mechanism and corrosion behavior, DOI: 10.1108/RPJ-11-2021-0325

• Khan H. M., Waqar S., Koç, E., Evolution Of Temperature And Residual Stress Behavior in Selective Laser Melting Of 316L Stainless Steel Across a Cooling Channel, DOI: 10.1108/RPJ-09-2021-0237

• Bulduk M. E., Çalışkan C. İ., Coşkun M., Özer G., Koç E., Comparison of the Effect of Different Topological Designs and Process Parameters on Mechanical Strength in Gears, DOI: 10.1007/s00170-021-08405-4
• Khan H. M., Özer G., Yılmaz M. S., Koç E., Corrosion of Additively Manufactured Metallic Components: A Review, DOI: 0.1007/s13369-021-06481-y

• Khan H. M., Özer G., Yılmaz M. S., Tarakçı G., Improvement of Corrosion Resistance of Maraging Steel Manufactured by Selective Laser Melting Through Intercritical Heat-Treatment, DOI: 10.5006/3972
• Kısasöz B. Ö., Serhatlı İ. E., Bulduk M. E., Selective Laser Sintering Manufacturing and Characterization of Lightweight PA 12 Polymer Composites with Different Hollow Microsphere Additives, DOI: 10.1007/s11665-021-06481-x

2021

• Öksüzcan İ., Çakan D., Yılmaz M. S., Ertuğrul O., Investıgation Of The Effect Of Heat Treatment Conditions On Hardness Properties Of Maraging Steels Produced By Additive Manufacturing, DOI: 10.46519/ij3dptdi.1024485

• Çalışkan C. İ., Özer G., Koç E., Sarıtaş U. S., Yıldız C. F., Çiçek Ö. V., Efficiency Research of Conformal Channel Geometries Produced by Additive Manufacturing in Plastic Injection Mold Cores (Inserts) Used in Automotive Industry, DOI: 10.1089/3dp.2021.0062

• Erturk A. T., Bulduk M. E., Tarakçı G., Özer G., Yarar E., Investigation of the Microstructure and Mechanical Characteristics of Lattice Structures Produced by Laser Powder Bed Fusion Method, DOI: 10.1007/s12540-021-01038-y

• Yılmaz M. S., Özer G., Şahin O., Karaaslan A., Investigation Of The Effects Of Different Retrogressıon And Re-Aging Parameters Applied To The 7075 Alloy On The Micro-Arc Oxidation Process, DOI: 10.1142/S0218625X21500785

• Özbay B., Bekem A., Serhatlı İ. E., Öztürk S., Bulduk M. E., Effects of copper fillers on mechanical and electrical properties of selective laser sintered PA 12-Cu composites, DOI: 10.1080/10667857.2021.1964203

• Çalışkan C. İ., Coşkun M., Özer G., Koç E., Vurkır T. A., Yöndem G., Investigation of manufacturability and efficiency of micro channels with different geometries produced by direct metal laser sintering, DOI:10.1007/s00170-021-07928-0

• Khan, H. M., Taşcıoğlu E., Kaynak Y., Tarakçı G., Effect of aging and finish machining on the surface integrity of selective laser melted maraging steel, DOI: 10.1108/RPJ-11-2020-0269]

• Akça Y., Özer G., Karaaslan A., Modification of Nitride Layer Applied on the Surface of DIN 1.2344 Hot Work Tool Steel with Boron, 20th International Metallurgy and Materials Congress 10 - 12 June 2021

• Khan H. M., Dirikolu M. H., Koç E., Weibull distribution of selective laser melted AlSi10Mg parts for compression testing, DOİ: 10.14744/ytu.jame.2021.00003

• Khan H. M., Tarakçı G., Bulduk M. E., Koç, E., Estimation of the compression strength and surface roughness of the as-built SLS components using weibull distribution, DOİ: 10.14744/ytu.jame.2021.00001

• Yılmaz M. S., Özer G., Öter Z. Ç., Ertuğrul O., Effects of hot isostatic pressing and heat treatments on structural and corrosion properties of direct metal laser sintered parts, DOI: 10.1108/RPJ-10-2020-0245

• Çalışkan C. İ., Özer G., Coşkun M., Koç E., “Investigation of direct metal laser sintering downskin parameters’ sagging effect on microchannels”, DOI: 10.1007/s00170-021-07057-8 

• Khan H. M., Şirin T. B., Tarakçı G., Bulduk M. E., Coşkun M., Koç E., Kaynak Y., Improving the Surface Quality and Mechanical Properties of Selective Laser Sintered PA2200 Components by the Vibratory Surface Finishing Process, DOI: 0.1007/s42452-021-04371-4

• Rasheed I., Banka H., Khan H. M., Pseudo-Relevance Feedback Based Query Expansion Using Boosting Algorithm, DOI: 10.1007/s10462-021-09972-4

• Khan H.M., Özer G., Tarakçı G., Coşkun M., Koç E., Kaynak Y., The İmpact of Aging and Drag‐Finishing on The Surface Integrity and Corrosion Behavior of the Selective Laser Melted Maraging Steel Samples, DOI: 10.1002/mawe.202000139

• Yılmaz M. S., Özer G., Şahin O., Karaaslan A., Micro Arc Oxidation Coating Parameter-Property Relationship

2020

• Karakoyun Y., Açıkgöz Ö., Çebi A., Koca A., Çetin G., Dalkılıç A. S., Wongwises S., A Comprehensive Approach to Analyze the Discrepancies in Heat Transfer Characteristics Pertaining to Radiant Ceiling Heating System, DOI: 10.1016/j.applthermaleng.2020.116517

• Hamaid M., K., Karabulut Y., Kıtay Ö., Kaynak Y., Jawahir I. S., Influence of the Post-Processing Operations on Surface Integrity of Metal Components Produced by Laser Powder Bed Fusion Additive Manufacturing: A Review, DOI: 10.1080/10910344.2020.1855649

• Bekem A., Özbay B., Bulduk M. E., Seçici Lazer Sinterlemede Poliamid 12'ye Dendritik Bakır Tozu İlavesinin Etkisi, DOI: 10.17341/gazimmfd.728198
• Özbay B., Serhatlı E. I., Processing and Characterization of Hollow Glass-Filled Polyamide 12 Composites by Selective Laser Sintering Method, DOI: 10.1080/10667857.2020.1824149
• Çalışkan C. İ., Arpacıoğlu Ü., Yapı Üretiminde Eklemeli İmalat Teknolojilerinin Karşılaştırmalı Değerlendirmesi - A Review of Additive Manufacturing Technologies in Building Production, DOI: 10.17482/uumfd.696952
• Onur E., Öter Z. Ç., Yılmaz M. S.,  Şahin E., Coşkun M., Tarakçı G., Koç E.,  Effect of HIP Process and Subsequent Heat Treatment on Microstructure and Mechanical Properties of Direct Metal Laser Sintered AlSi10Mg Alloy, DOI: 10.1108/RPJ-07-2019-0180
• Koç E, Çalışkan C.İ., Coşkun M., Khan H. M., Unmanned Aerial Vehicle Production with Additive Manufacturing, DOI: 10.30518/jav. 681037

• Özer G., Özbay B., Öter Z. Ç., Tarakçı G., Yılmaz M. S., Bulduk M.E., Koç E., Acar S., Güler K. A. Investigation of the Surface Quality and Dimensional Accuracy of Polymer Patterns Produced by Selective Laser Sintering (SLS) Method for Investment Casting (IC), DOI: 10.1080/13640461.2020.1773053

• Özer G., Tarakçı G., Yılmaz M. S., Öter Z. Ç., Sürmen Ö., Akça Y., Coşkun M., Koç E., Investigation of the Effects of Different Heat Treatment Parameters on the Corrosion and Mechanical Properties of the AlSi10Mg Alloy Produced with Direct Metal Laser Sintering, DOI: 10.1002/maco.201911171
• Özbay B., Bekem A., Ünal A., Manufacturing of Hybrid Yarn Thermoplastic Composites by the Method of Filament Winding, DOI: 10.35378/gujs.456076
• Özer G., Eklemeli Üretim Teknolojileri Üzerine Bir Derleme, DOI: 10.28948/ngumuh.626011-950193

2019

• Güler K. A., Kısasöz A., Özer G., Karaaslan A., Cooling Slope Casting of AA7075 Alloy Combined with Reheating and Thixoforging, DOI: 10.1016/S1003-6326(19)65129-0
• Öter Z.Ç., Azaklı Y., Cengiz S., Gencer Y., Tarakçı M., Microarc Oxidation of Pure Aluminium in Alumina Containing Electrolytes, DOI: 10.1080/02670844.2019.1698162
• Yılmaz M.S., Eklemeli İmalat (DMLS) Kullanılarak Üretilmiş AlSi10Mg Numunelerinde Parametre/Yüzey Özellik İlişkisinin İrdelenmesi, II. Ulusal Mühendislikte Bilimsel ve Mesleki Çalışmalar Kongresi
• Yılmaz M.S., Ozer G., Oter Z.C., Tarakcı G., Coşkun M., Koç E., Uysal Ü., The Effects of Hatch Distance on the Thermal and Mechanical Properties of AlSi10Mg Parts in Direct Metal Laser Sintering (DMLS) Method, IV. Uluslararası Bilimsel ve Mesleki Çalışmalar Kongresi
• Çalışkan C.İ., Historical Silahtaraga Power Plant-Black Sea Decovil Line Research, Double Military Decovil Photogrammetry Study DOI: 10.32474/JAAS.2019.01.000102
• Ertuğrul O., Öter Z.Ç., Yılmaz M.S., Şahin E., Coşkun M., Tarakçı G., Koç E., Influence Of Hot Isostatic Pressing And Subsequent Heat Treatment On Mechanical Properties Of Direct Metal Laser Sintered ALSI10MG Alloy,  AMC TURKEY 2019 Eklemeli İmalat Konferansı
• Bulduk M.E., Coşkun M., Ertürk A.T., Tarakçı G., Ergin U. The Microstructure and Mechanical Properties of Porous Structures Produced from AlSi10Mg by Direct Metal Laser Sintering, AMC TURKEY 2019 Eklemeli İmalat Konferansı
• Khan H.M., Koç E., Dirikolu M. H., Weibull Distribution of Selective Laser Melted AlSi10Mg Parts for Compression Testing, AMC TURKEY 2019 Eklemeli İmalat Konferansı
• Özbay B., Özer G., Bulduk M.E., Tarakçı G., Öter Z.Ç., Koç E., Production of Primecast Polystyrene by Selective Laser Sintering (SLS) Method And Development Of Surface Roughness Of Sintered Parts, AMC TURKEY 2019 Eklemeli İmalat Konferansı
• Yılmaz M.S., Özer G., Şahin O., Karaaslan A., Effect of Micro Arc Oxidation (MAO) Parameters on Coating/Interface Behavior of 7075-T6 Aluminium Alloy, 8. Uluslararası İleri Teknolojiler Konferansı
• Akça Y., Özer G., Yılmaz M.S., Koç E., Ekstrüzyon Preslerinde Enerji Yönetimi, ALUS'09 9. Uluslararası Alüminyum Sempozyumu
• Özer G., Kaya I., Karaaslan A., Effects Of Retrogression And Reaging (RRA) On The Mechanical And Physical Properties In Aluminium Alloys 7050 And 7075, ALUS'09 9. Uluslararası Alüminyum Sempozyumu

• Çalışkan C.İ., Koç E., Khan H.M., Bulduk M.E., Double Stud Cargo Fitting Research, Alternative Cargo Clip Design and Analysis, DOI: 10.15394/ijaaa.2019.1429
• Khan H.M., Majeed M., Rasheed I., Finite Element Analysis of Melt Pool Thermal Characteristics with Passing Laser in SLM Process, DOI:  10.1016/j.ijleo.2019.163068
• Soylemez E., Koç E., Coşkun M., Thermo-Mechanical Simulations of Selective Laser Melting for AlSi10Mg Alloy to Predict the Part-Scale Deformations, DOI: 10.1007/s40964-019-00096-4
• Özer G., Tarakçı G., Yılmaz M.S., Öter Z.Ç., Sürmen Ö., Akça Y., Coşkun M., Koç E., Investigation of the Effects of Different Heat Treatment Parameters on the Corrosion and Mechanical Properties of the AlSi10Mg Alloy Produced with Direct Metal Laser Sintering, DOI: 10.1002/maco.201911171
• Çalışkan C.İ., Reviving Ottoman Bird Palaces and Retro Approach with Additive Manufacting Method, DOI: 10.1016/j.daach.2019.e00115
• Çalışkan C.İ., Koç E., Kuşevleri ve 3 Boyutlu Baskı Yöntemi ile Üretimi, DOI: 10.16947/fsmia.582347
• Özer G., Gecu R., Karaaslan A., The Effect of Retrogression and Re‐Aging Treatment on Mechanical and Tribological Features of AA7075 Aluminium Alloy, DOI: 10.1002/mawe.201800056
• Öter Z. Ç., Coşkun M., Akça Y., Sürmen Ö., Yılmaz M. S., Özer G., Tarakçı G., Khan H. M., Koç E., Support Optimization for Overhanging Parts in Direct Metal Laser Sintering, DOI: 10.1016/j.ijleo.2018.12.072
• Öter Z. Ç., Coşkun M., Akça Y., Sürmen Ö., Yılmaz M. S., Özer G., Tarakçı G. Koç E., Benefits of Laser Beam Based Additive Manufacturing in Die Production, DOI: 10.1016/j.ijleo.2018.09.079

2018

• Khan H. M., Dirikolu M. H., Koç E., Parameters Optimization for Horizontally Built Circular Profiles: Numerical and Experimental İnvestigation, DOI: 10.1016/j.ijleo.2018.08.095
• Özer G., Karaaslan A., Effects of RRA Heat Treatment on the Exfoliation Corrosion (EXCO), İntergranular Corrosion (IGC), and Electrical Conductivity of AA7075 Alloy, DOI: 10.1002/maco.201810436
• Khan H. M., Dirikolu M. H., Koç E., Öter Z. Ç., Numerical İnvestigation of Heat Current Study Across Different Platforms in SLM Processed Multi-Layer AlSi10Mg, DOI: 10.1016/j.ijleo.2018.05.081
• Yılmaz F., Alüminyum ve Çelik Ekseninde Küresel Ticaret, Trump'ın Vergi Kararı ve Türkiye'ye Etkisi
• Küçük İ., Effect of Cold Rolling Reduction Rate on Corrosion Behaviour of Twin-roll Cast 8006 Aluminium Alloys, DOI: 10.17776/csj.390178
• Tarakçı G., Cengiz S., Gündüz K. Ö., Azaklı Y., Öter Z. Ç., Gençer Y., İpek M., AL-MG-ZN Alaşımlarının Mikroark Oksidasyonu
• Yılmaz M. S., Şahin O., Applying High Voltage Cathodic Pulse with Various Pulse Durations on Aluminium via Micro-Arc Oxidation (MAO), DOI: 10.1016/j.surfcoat.2018.04.085
• Öter Z. Ç., Coşkun M., Koç E., Effect of Building Platform Position on the Surface Quality, Dimensional Accuracy, and Geometrical Precision of Direct Metal Laser Sintering (DMLS) Parts
• Yılmaz M. S., Şahin O., Effect Of Electrical Parameters On Tribology Of Micro Arc Oxidation (Mao) Coatings Formed On Aluminum
• Sürmen Ö., Zeytin S., Tarakçı M., Gençer Y., Improving the Productivity and Energy Efficiency by A Heat Treatment Method Applied to Aluminum Forged Parts, DOI: 10.19044/esj.2018.c4p2
• Ulus A., İpek S. K., Ekici H., Öter Z. Ç., Koç E., Investigation of Elemental Distribution in the Sheet Sections After Aluminum Continuous Sheet Casting, Cold Rolling and Heat Treatment Processes, DOI:10.1007/978-3-319-72284-9_125
• Özer G., Karaaslan A.,  Investigation of the Change of Mechanical and Physical Properties of AA7075 Alloy by RRA Heat Treatment Applied at Different Time and Temperature
• Yılmaz M. S., Şahin O., Investigation of the High Energy Single Pulses Affect on Micro Arc Oxidation Process on Aluminium, DOI: 10.11159/mmme18.126

2017

• Çalışkan C. İ., Uçak Kabin İçi İnovatif Ürünler ve Eklemeli İmalat İle Üretimi
• Koç E., Coşkun M., Öter Z. Ç. Anisotropic Mechanical Behaviour Of Direct Metal Laser Sintering (DMLS) Parts

2016

• Yılmaz F., Alüminyumda Geri Dönüşümün Artan Önemi
• Sürmen Ö., Tarakçı M., Gençer Y., Zeytin S., Dövme Alüminyum Parçalarının Isıl İşlem Pratiğinin Geliştirilmesi
• Koç E., Akça Y., Öter Z. Ç., Coşkun M., Selective Laser Sintering Of Aluminum Extrusion Dies, DOI: 10.13140/RG.2.2.35134.89922
• Yılmaz F., Elektrikli Araçlar ve Alüminyum
• Sürmen Ö., Tarakçı M., Gençer Y., Zeytin S., Improvement Of Heat Treatment Application Of Aluminium Forged Parts

2015

• Al-Jabbouli, Koç, E., Akça, Y., Classification of Main Faults in the Production Process of Extruded Aluminium Profiles
• Yılmaz, F., İklim Değişikliği Gündemi Alüminyum Endüstrimize Ne Getiriyor?

2014

• Akça, Y., Yılmaz F., Koç E.,  Alüminyum Profil İmalatında İşçi Sağlığı ve İş Güvenliği
• Yılmaz F., 2014'te Metal Endüstrisi

2013

• Yılmaz  F., Akça Y., Metal Endüstrisi, Alüminyum ve Gelecek

Bültenler

• Alüminyum İmalat Tesislerinde Enerji Verimliliği ve Sera Gazlarının Azaltılması Proje Bülteni